FPGA I/O Node

Use an FPGA I/O Node configured for reading with this device.

Terminals in Software

To access the following terminals for this device, use the FPGA I/O Node.

Table 99. Terminals in Software
Terminal Description
AIx Analog input channel x, where x is the number of the channel. The NI 9201 has AI channels 0 to 7.

You can configure the minimum time between conversions and the channels to scan.

Arbitration

This device only supports the Arbitrate if Multiple Requestors Only option for arbitration. You cannot configure arbitration settings for this device.

Methods

This device does not support any methods.

I/O Properties

To access the following properties for this device, use the FPGA I/O Property Node.

Table 100. I/O Properties
Property I/O Type Description
LSB Weight AO Returns the LSB weight in nV/LSB for the channel. Use this value to convert data if you set the Calibration Mode to Raw in the Module Properties dialog box.
Offset AO Returns the calibration offset in nV for the channel. Use this value to convert data if you set the Calibration Mode to Raw in the Module Properties dialog box.

Module Properties

To access the following module properties for this device, use the FPGA I/O Property Node.

Table 101. Module Properties
Property Description
Module ID Returns the module ID, 0x70A4.
Serial Number Returns the unique serial number of the module.
Vendor ID Returns the NI vendor ID, 0x1093.

Single-Cycle Timed Loop

This device does not support the single-cycle Timed Loop.