niBT HCI LE Enhanced Receiver Test VI
- Updated2023-02-21
- 3 minute(s) read
Sends a command to the device under test (DUT) to start the receiver test.
 |
VISA resource name specifies the resource name corresponding to the DUT. |
||||||
 |
channel number specifies the Bluetooth transmit channel number of the generated signal. The default value is 0. |
||||||
|
PHY specifies the type of the generated packet by the physical layer of the DUT. The default value is 1Mbps.
|
||||||
|
modulation index specifies the type of modulation index at the generator. The default value is Standard.
|
||||||
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
||||||
 |
VISA resource name out returns the resource name to which a VISA session is opened and the resource class. The class name matches the VISA resource name parameter. |
||||||
 |
status returns the status of the receiver test command. The DUT receives and executes the receiver test command if the status parameter returns a 0x00 value. The receiver test command fails if the status parameter returns a non-zero (0x01-0xFF) value. |
||||||
 |
error out contains error information. This output provides standard error out functionality. |