niBTDTM_HCILETestEnd
- Updated2023-02-21
- 1 minute(s) read
int32 __stdcall niBTDTM_HCILETestEnd (niBTDTMSession* session, int32* packetCount, int32* status);
Purpose
Sends the command to the DUT to end the transmitter or the receiver test.
Parameters
Input | ||
Name | Type | Description |
session | niBTDTMSession | Specifies the name of the communication port to which the DUT is connected. |
Output | ||
Name | Type | Description |
packetCount | int32* | Returns the number of packets received by the DUT. |
status | int32* | Returns the status of the test end command. The DUT receives and executes the test end command if the status parameter returns a 0x00 value. The test end command fails if the status parameter returns a non-zero (0x01-0xFF) value. |
Return Value
Name | Type | Description | ||||||||
returnValue | int32 |
Returns the status code of this operation. The status code either indicates success or describes an error or warning. Examine the status code from each call to an niBTDTM function to determine if an error has occurred. The general meaning of the status code is as follows:
|
||||||||