Configure DF2 Measurement
- Updated2023-02-21
- 1 minute(s) read
Use the VIs on this palette to configure DF2 measurements.
 |
Note The help topics for some VIs do not contain parameter details. Refer to the corresponding property help topics for more information about these VIs. |
| Palette Object | Description |
|---|---|
| niBT SA DF2 Set Measurement Enabled |
Sets the DF2 Enabled property. |
| niBT SA DF2 Set All Traces Enabled |
Sets the DF2 All Traces Enabled property. |
| niBT SA DF2 Set RBW Filter Type |
Sets the DF2 RBW Filter Type property. |
| niBT SA DF2 Set RBW Filter Bandwidth |
Sets the DF2 RBW Filter Bandwidth property. |
| niBT SA DF2 Set Measurement Offset |
Sets the DF2 Measurement Offset property. |
| niBT SA DF2 Set Measurement Length Option |
Sets the DF2 Measurement Length Option property. |
| niBT SA DF2 Set Measurement Length |
Sets the DF2 Measurement Length property. |
| niBT SA DF2 Set Number of Averages |
Sets the DF2 Number of Averages property. |
| niBT SA DF2 Set Average Type |
Sets the DF2 Average Type property. |