Spectral Measurements:LEInBandEmission:FFT Window Type Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: LEInBandEmission FFT Window Type
Property of niBTAnalysis
Specifies the time-domain window type that is used for spectral smoothing. Configure this property only if you set the LEInBandEmission Measurement Method property to FFT.
The default value is Flat Top.
| None (0) |
Specifies that the toolkit does not use FFT windowing for spectral smoothing. |
| Hanning (1) |
Specifies a Hanning FFT window type. |
| Hamming (2) |
Specifies a Hamming FFT window type. |
| Blackman-Harris (3) |
Specifies a Blackman-Harris FFT window type. |
| Exact Blackman (4) |
Specifies an Exact Blackman FFT window type. |
| Blackman (5) |
Specifies a Blackman FFT window type. |
| Flat Top (6) |
Specifies a Flat Top FFT window type. |
| 4 Term B-Harris (7) |
Specifies a 4-term Blackman-Harris FFT window type. |
| 7-term Blackman-Harris (8) |
Specifies a 7-term Blackman-Harris FFT window type. |
| Low Sidelobe (9) |
Specifies a low side lobe FFT window type. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niBT SA LEInBandEmission Set FFT Window Type |
| Resettable | Yes |