Demodulation:CFO:RBW Filter:Type Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: CFO RBW Filter Type
Property of niBTAnalysis
Specifies the type of the resolution bandwidth (RBW) filter used for the measurement.
The default value is Dolph-Chebyshev.
 |
Note For LE-Enhanced and LE-LR-125k packets, only Dolph-Chebyshev filter is valid. |
| Gaussian (0) |
Specifies that the toolkit performs Gaussian RBW filtering. |
| Flat (1) |
Specifies that the toolkit performs flat RBW filtering. |
| None (2) |
Specifies that the toolkit does not perform RBW filtering. |
| Dolph-Chebyshev (3) |
Specifies that the toolkit performs Dolph-Chebyshev RBW filtering. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niBT SA CFO Set RBW Filter Type |
| Resettable | Yes |