Demodulation:Advanced:Pattern Check Enabled Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Pattern Check Enabled
Property of niBTAnalysis
Specifies whether to perform or skip the measurement when the payload pattern in the acquired signal is found.
The toolkit searches for the payload pattern 11110000 or 00001111 for DF1 measurements, and it searches payload pattern 10101010 or 01010101 for DF2 and CFO measurements. The toolkit skips the measurement if the payload pattern in the acquired signal does not match. This property is applicable only for DF1, DF2, and CFO measurements. If the packet type is LE-LR-125k, the search pattern is 00110011 or 11001100 for DF2 measurement and 00001111 or 11110000 for DF1 and CFO measurements.
The default value is False.
| False (0) |
The toolkit does not check the payload pattern to perform the measurement. |
| True (1) |
The toolkit checks the payload pattern to perform the measurement. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |