Spectral Measurements:LEInBandEmission:Detector Type Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: LEInBandEmission Detector Type
Property of niBTAnalysis
Specifies the method that the toolkit uses to detect the power within each detection interval when you set the LEInBandEmission Measurement Method property to Sweep, and it detects the power across overlapping FFTs when you set the LEInBandEmission Measurement Method property to FFT.
The default value is Average.
| Peak (0) |
Specifies that the toolkit uses max-hold detection to detect the power. |
| Average (1) |
Specifies that the toolkit uses average detection to detect the power. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niBT SA LEInBandEmission Set Detector Type |
| Resettable | Yes |