Mounting the Device on a Panel

You can use the NI panel mounting kit to mount the NI 9155 on a panel.

What to Use

  • NI 9155
  • Screwdriver, Phillips #2
  • NI panel mounting kit, 782818-01
    • Panel mounting plate
    • M4x50 screw (x2)

What to Do

Complete the following steps to mount the NI 9155 on a panel.


1378

  1. Align the NI 9155 and the panel mounting plate.
  2. Fasten the panel mounting plate to the NI 9155 using the screwdriver and M4x50 screws. NI provides these screws with the panel mounting kit. Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).
    Note You must use the screws provided with the NI panel mounting kit because they are the correct depth and thread for the panel mounting plate.
  3. Fasten the panel mounting plate to the surface using the screwdriver and screws that are appropriate for the surface. The maximum screw size is M5 or number 10.