Mounting the NI-9149 on a DIN Rail

You can use the NI DIN rail mounting kit to mount the NI-9149 on a standard 35-mm DIN rail.

What to Use

  • NI-9149
  • Screwdriver, Phillips #2
  • NI DIN rail mounting kit, 779018-01
    • DIN rail clip
    • M4 × 25 flathead screw (x2)

What to Do

Complete the following steps to mount the NI-9149 on a DIN rail.


1378

  1. Align the NI-9149 and the DIN rail clip.
  2. Fasten the DIN rail kit to the NI-9149 using the screwdriver and M4 × 25 flathead screws. NI provides these screws with the DIN rail mounting kit. Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).
    Note You must use the screws provided with the NI DIN rail mounting kit because they are the correct depth and thread for the DIN rail clip.