Verify the System IP Configuration

  1. Put the NI-9147 in safe mode by holding the RESET button down for 5 seconds.
    The STATUS LED starts blinking three times every few seconds.
  2. Set a new DHCP connection by holding the RESET button down for 5 seconds. The STATUS LED repeats the same behavior from Step 1.
    If the NI-9147 fails to set a new DHCP address, it assigns itself a link-local IP address. If the DHCP connection is successful and appropriate for your application, skip to Step 5.
  3. In MAX, expand your system under Remote Systems.
  4. Select the Network Settings tab to configure the IP and other network settings.
  5. Reboot the NI-9147 by pressing the RESET button.