USB Device Port

The NI-9147 USB device port is intended for device configuration, application deployment, debugging, and maintenance. For example, you can use the USB device port to install software or driver updates during field maintenance instead of interrupting communication on the RJ-45 Ethernet ports.

Caution Do not disconnect the power supply wires, I/O-side wires, or connectors from the product unless power has been switched off or the area is known to be nonhazardous.
Attention Ne déconnectez les fils d'alimentation, les fils côté E/S et les connecteurs du produit que s'il est hors tension ou qu'il se trouve dans une zone non dangereuse.
Hazardous Voltage The product is designed for nonhazardous, live signals. You must ensure that all signals connected to the product are isolated from hazardous, live circuits and no unsafe voltages are present at the inputs. Voltages that exceed the specifications could result in damage to the product or electric shock.
Tension dangereuse Le produit est conçu pour les signaux en direct non dangereux. Vous devez vous assurer que tous les signaux connectés au produit sont isolés des circuits dangereux sous tension et qu'aucune tension dangereuse n'est présente aux entrées. Des tensions supérieures à celles mentionnées dans les spécifications peuvent endommager le produit ou provoquer un choc électrique.

The following table shows the pinout for the USB device port.

Description Signal Pin Pinout Pin Signal Description
USB data+ D+ 3 1378 2 D- USB data-
Ground GND 4 1 VCC Cable power (5 V)

The following NI cable is available for the NI-9147.

Table 5. USB Device Port Cable
Cable Length Part Number
USB Cable 1 m 157788-01