Interconnecting the Unidirectional SISO (Baseband and IF) Modules
- Updated2023-02-17
- 3 minute(s) read
Interconnecting the Unidirectional SISO (Baseband and IF) Modules
Complete the following steps to connect the modules of the unidirectional SISO (baseband and IF) mmWave Transceiver System configuration.
-
Connect the adjoining
PXIe-3620 RF Upconverter and Downconverter Module and PXIe-3630 modules in the RX chassis using four MMPX(m)-to-MMPX(m) cables.
- Connect the RX I+ connector of the PXIe-3620 front panel to the I+ connector of the PXIe-3630 front panel.
- Connect the RX I– connector of the PXIe-3620 front panel to the I– connector of the PXIe-3630 front panel.
- Connect the RX Q+ connector of the PXIe-3620 front panel to the Q+ connector of the PXIe-3630 front panel.
- Connect the RX Q– connector of the PXIe-3620 front panel to the Q– connector of the PXIe-3630 front panel.
-
Connect the adjoining PXIe-3630 and PXIe-7902 modules in the RX chassis using four Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cables.
- Connect the 0 connector of the PXIe-3630 front panel to the PORT 0 connector of the PXIe-7902 front panel.
- Connect the 1 connector of the PXIe-3630 front panel to the PORT 1 connector of the PXIe-7902 front panel.
- Connect the 2 connector of the PXIe-3630 front panel to the PORT 2 connector of the PXIe-7902 front panel.
- Connect the 3 connector of the PXIe-3630 front panel to the PORT 3 connector of the PXIe-7902 front panel.
Figure 16. Interconnecting the PXIe-3620, PXIe-3630, and PXIe-7902 Modules 
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
- MMPX(m)-to-MMPX(m) Cables
-
Connect the PORT 4 connector of the PXIe-7902 front panel to the PORT 4 connector of the PXIe-7902 front panel using a Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cable.
Figure 9. Unidirectional SISO (Baseband and IF) RX Chassis 
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
- MMPX(m)-to-MMPX(m) Cables
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cable
-
Connect the adjoining PXIe-3610 and PXIe-3620 modules in the TX chassis using four MMPX(m)-to-MMPX(m) cables.
- Connect the I+ connector of the PXIe-3610 front panel to the TX I+ connector of the PXIe-3620 front panel.
- Connect the I– connector of the PXIe-3610 front panel to the TX I– connector of the PXIe-3620 front panel.
- Connect the Q+ connector of the PXIe-3610 front panel to the TX Q+ connector of the PXIe-3620 front panel.
- Connect the Q– connector of the PXIe-3610 front panel to the TX Q– connector of the PXIe-3620 front panel.
-
Connect the adjoining PXIe-7902 and PXIe-3610 modules in the TX chassis using four Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cables.
- Connect the PORT 0 connector of the PXIe-7902 front panel to the 0 connector of the PXIe-3610 front panel.
- Connect the PORT 1 connector of the PXIe-7902 front panel to the 1 connector of the PXIe-3610 front panel.
- Connect the PORT 2 connector of the PXIe-7902 front panel to the 2 connector of the PXIe-3610 front panel.
- Connect the PORT 3 connector of the PXIe-7902 front panel to the 3 connector of the PXIe-3610 front panel.
Figure 10. Interconnecting the PXIe-7902, PXIe-3610, and PXIe-3620 Modules 
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
- MMPX(m)-to-MMPX(m) Cables
Figure 11. Unidirectional SISO (Baseband and IF) TX Chassis 
- Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) Cables
- MMPX(m)-to-MMPX(m) Cables
Related Information
- Connecting mmRH-3642/3643/3652/3653 Radio Heads to a Unidirectional System
Complete the following steps to connect mmRH-3642/3643/3652/3653 radio heads to a unidirectional mmWave Transceiver System.
- Connecting mmRH-3647/3657 Radio Heads to a Unidirectional System
Complete the following steps to connect mmRH-3647/3657 radio heads to a unidirectional mmWave Transceiver System.