Sets approximation or detail undecimated wavelet transform (UWT) coefficients at a specific level. Use the WA Undecimated Wavelet Transform VI to compute the UWT. Use the WA Get Coefficients of Undecimated Wavelet Transform VI to obtain the UWT coefficients.


icon

Inputs/Outputs

  • cu16.png coef type —

    coef type specifies the coefficient type this VI sets.

  • c1dcclst.png UWT coef —

    UWT coef specifies the approximation coefficients and the detail coefficients from the multi-level undecimated wavelet transform (UWT). Each element of the array contains the 2D UWT results of one level. The ith element stores the approximation coefficients and the detail coefficients at level i+1.

  • c2ddbl.png low_low —

    low_low specifies the approximation coefficients from the lowpass analysis filtering on each row and each column. The low_low coefficients are a low-resolution approximation of the original 2D signal.

  • c2ddbl.png low_high —

    low_high specifies the detail coefficients from the lowpass analysis filtering on each row and the highpass analysis filtering on each column. The high-frequency signal along the column direction influences the low_high coefficients.

  • c2ddbl.png high_low —

    high_low specifies the detail coefficients from the highpass analysis filtering on each row and the lowpass analysis filtering on each column. The high-frequency signal along the row direction influences the high_low coefficients.

  • c2ddbl.png high_high —

    high_high specifies the detail coefficients from the highpass analysis filtering on each row and each column. The high-frequency signal along the diagonal direction influences the high_high coefficients.

  • ci32.png coef level —

    coef level specifies the coefficient level this VI sets. The coef level must be between 1 and the largest level of the coefficients. The levels in the WA Undecimated Wavelet Transform VI specifies the largest level of the coefficients. The default is 1, which means this VI sets the coefficients at level 1.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • c2ddbl.png new UWT coef —

    new UWT coef specifies the undecimated wavelet transform (UWT) coefficients to set.

  • i1dcclst.png UWT coef out —

    UWT coef out returns the undecimated wavelet transform (UWT) coefficients set to new UWT coef at the coef type and coef level.

  • i2ddbl.png low_low out —

    low_low out returns the approximation coefficients from the lowpass analysis filtering on each row and each column. The low_low out coefficients are a low-resolution approximation of the original 2D signal.

  • i2ddbl.png low_high out —

    low_high out returns the detail coefficients from the lowpass analysis filtering on each row and the highpass analysis filtering on each column. The high-frequency signal along the column direction influences the low_high out coefficients.

  • i2ddbl.png high_low out —

    high_low out returns the detail coefficients from the highpass analysis filtering on each row and the lowpass analysis filtering on each column. The high-frequency signal along the row direction influences the high_low out coefficients.

  • i2ddbl.png high_high out —

    high_high out returns the detail coefficients from the highpass analysis filtering on each row and each column. The high-frequency signal along the diagonal direction influences the high_high out coefficients.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.