Moves an array of 8-bit data from local memory to the specified address space and offset.


icon

Inputs/Outputs

  • cu16.png address space (A16: 1) —

    address space specifies the address space to map. The following table lists the valid entries for specifying address space.

    ValueDescription
    VXI, VME, and GPIB-VXI

    VXI/VME A16 (1)

    VXI/VME A24 (2)

    VXI/VME A32 (3)

    VXI/VME A64 (4)
    PXI

    PXI Memory Allocations (9)

    PXI Configuration (10)

    PXI BAR0 (11) to PXI BAR5 (16)
  • cvsrn.png VISA resource name —

    VISA resource name specifies the resource to be opened. The VISA resource name control also specifies the session and class.

  • cu32.png offset (0) —

    offset is the offset (in bytes) of the device to write to. offset accepts a 32- or 64-bit unsigned integer as input. The type of resource determines how offset specifies the offset.

    • INSTR Specific—The offset specified in the VISA Move Out 8, VISA Move Out 16, VISA Move Out 32, and VISA Move Out 64 operations for an INSTR Resource is the offset address relative to the device's allocated address base for the corresponding address space that was specified. For example, if address space specifies VXI/VME A16, offset specifies the offset from the logical address base address of the VXI device specified. If address space specifies VXI/VME A24, A32, or A64, offset specifies the offset from the base address of the VXI device's memory space allocated by the VXI Resource Manager within VXI/VME A24, A32, or A64.

      The count specified in the VISA Move Out XX operations for an INSTR Resource is the number of data items (of the size corresponding to the operation) to move, beginning at the specified offset. Therefore, offset + count*size cannot exceed the amount of memory exported by the device in the given space.

    • MEMACC Specific—For a MEMACC Resource, offset specifies an absolute address.

      The count specified in the VISA Move Out XX operations for a MEMACC Resource is the number of data items (of the size corresponding to the operation) to move, beginning at the specified offset. Therefore, offset + count*size cannot exceed the total amount of memory available in the given space.

  • c1du8.png data —

    data is the data you want to move.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • ivsrn.png VISA resource name out —

    VISA resource name out is a copy of the VISA resource name that VISA functions return.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.