IF Transceivers

ni5640R Configure Number of Samples VI

  • Updated2023-02-21
  • 2 minute(s) read
Owning Palette: Generation Configuration
Installed With: NI-5640R

Configures the number of samples in a finite operation or configures the device to continuously acquire (if ni5640R session is an acquisition session) or generate (if ni5640R session is a generation session) samples.

ni5640R Configure Number of Samples

cio.gif

ni5640R session identifies the instrument session. ni5640R session is obtained from the ni5640R Init Acquisition Session or the ni5640R Init Generation Session VI.

cbool.gif

number of samples is finite specifies whether to configure the device to acquire/generate a finite number of samples or to acquire/generate samples continuously.

ci32.gif

number of samples specifies the number of samples to acquire if number of samples is finite is set to TRUE.

cerrcodeclst.gif

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

iio.gif

ni5640R session out passes a reference to the instrument session to the next VI. ni5640R session was obtained from the ni5640R Init Acquisition Session or the ni5640R Init Generation Session VI.

ierrcodeclst.gif

error out contains error information. This output provides standard error out functionality.

Log in to get a better experience