Powering the ETX-1620x On and Off
- Updated2025-07-17
- 1 minute(s) read
Powering the ETX-1620x On
- All rack panels are installed and doors are closed
- The field wiring cable is connected to facility power
- The main disconnect branch breaker is on
- Verify that the status LED is solid green.
- Press the power button.
- Verify that the power LED is white, the status LED is green, and that Windows starts.
What Should I Do if the Rack Does Not Power On?
Complete the following troubleshooting options if the rack does not power on:
- Ensure the system facility power is correct for the rack.
- Verify that the power connection is installed correctly.
- Ensure that the main disconnect branch breaker is turned on.
- Ensure the Interlocks and EMO Measure are configured to allow the system to turn on. Refer to the respective section for configuration information.
Powering the ETX-1620x Off
- Close any open applications.
- Shut down Windows.
- Press and hold the power button.
Note Disconnect the rack from facility power before performing any maintenance or
repair procedures.
Related Information
- Closing Interlocks
The ETX-1620x includes an interlock system to prevent devices from outputting hazardous voltage except under controlled conditions.
- Configuring EMO Measure
The EMO Measure feature can be used to remotely hard shutdown the rack when the mass interconnect is connected to a test adapter, as indicated in the following caution.