Connect your cRIO-904x to your host computer using USB through the USB 3.1 Type-C Dual Role Port.

Complete the following steps to connect the cRIO-904x to the host computer using the USB 3.1 Type-C Dual Role Port.

  1. Power on the host computer.
  2. Connect the cRIO-904x to the host computer using the USB-to-Type-A cable (included in kit), inserting the USB Type-C connector into the USB 3.1 Type-C Dual Role Port. Connect the other end of the USB cable (Type-A) to the host computer.

    The device driver software automatically detects the cRIO-904x.



  3. Select Configure and install software to this device.
    Note If the device driver software does not detect the controller, verify that you installed the appropriate NI software in the correct order on the host computer as described in Installing Software on the Host Computer.