Installing the CPS-8910 in a Rack

The CPS-8910 comes with adjustable rack-mount ears for front or rear-facing installation, as shown in the following figure. Complete the following steps to install the CPS-8910 and connect devices to it.

Caution When mounting the equipment in the rack, do not create a hazardous condition due to uneven mechanical loading.
  1. Mount the CPS-8910 in the desired position by installing the rack-mount ears and tightening the four rack-mounting screws as shown.
    Figure 2. CPS-8910 Rack-Mount Ear Installation

    1378

  2. Connect the 12 V power supply to the CPS-8910.
  3. Connect the PCI Express host device to either the x8 or x4 upstream port connection.
  4. Connect up to eight PCI Express expansion systems or devices to the x4 downstream ports.
  5. Power on the chassis or computer containing the PXI Express or PCI Express host.