Mounting the cDAQ Chassis on a Panel with a Panel Mounting Kit
- Updated2024-12-11
- 1 minute(s) read
You can use a panel mounting kit to mount the cDAQ-chassis on a panel.
Complete the following steps to mount the cDAQ chassis on a panel. This mounting technique requires a Phillips #2 screwdriver and a NI-9905 panel mounting kit.
- Align the cDAQ chassis and the panel mount plate.
- Fasten the panel mounting plate to the cDAQ chassis using the screwdriver and three M4x25 screws, included in the kit. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
-
Fasten the panel mounting plate to the surface using the screwdriver and screws that are appropriate for the surface. The maximum screw size is M5 or number 10.
Figure 20. Mounting the Chassis on a Panel (cDAQ-9189 Shown) 
The following figure shows the panel mounting dimensions for the cDAQ-9187.
Figure 21. cDAQ-9187 Panel Mounting Dimensions (cDAQ-9189 Shown) 
Related Information
- Part Numbers for Recommended Cables and Accessories
Use part numbers to purchase the cables and the accessories for optimizing the performance of cDAQ-9187.