Hard-Wired PEP Connection Specifications

MAINs power connections for ATE Core Configurations Generation 2 systems containing RMX-10140-32D2 3-Phase 32 A Delta PEPs, RMX-10140-50D2P 3-Phase 50 A Delta PEPs, and RMX-10140-50Y2P 3-Phase 50 A Wye PEPs must be hard-wired.

Notice Use only copper conductors for hard-wired PEP connections.

RMX-10140-32D2 Power Connection Specifications



Note RMX-10140-32D2 placement on an ATE-38U/44U or ATE-38E is shown in the previous diagram. This PEP is also compatible with the ATE-15U.
Figure Callout Component Tool Description
1 Input protective enclosure 3 mm hex driver with 1.3 N · m (11.5 in. · lb) torque for screws Enclosure for hard-wired power connections to the PEP.
2 M4 screw thread input terminal block #2 Phillips screwdriver with 1.2 N · m to 1.8 N · m (10.6 in. · lb to 15.9 in. · lb) torque Input terminal block for connecting hard-wired MAINs power to the PEP.
Note Use 22 AWG to 8 AWG wire, stripped to 8.0 mm (0.3 in.).
3 Earth termination mechanical lug 3/16 hex driver with 5.1 N · m (45.0 in. · lb) torque GND terminal for input power.
Note Use 14 AWG to 2/0 AWG wire, stripped to 15.7 mm (0.6 in.).
4 Cable inlet grommet N/A Heyco M4848 15.0 mm to 25.4 mm (0.6 in. to 1 in.) grommet.

RMX-10140-50D2P Power Connection Specifications



Figure Callout Component Tool Description
1 Input protective enclosure 3 mm hex driver with 1.3 N · m (11.5 in. · lb) torque for screws Enclosure for hard-wired power connections to the PEP.
2 Earth termination mechanical lug 3/16 hex driver with 5.1 N · m (45.0 in. · lb) torque GND terminal for input power.
Note Use 14 AWG to 2/0 AWG wire, stripped to 15.7 mm (0.6 in.).
3 M6 screw thread input terminal block #2 Phillips screwdriver with 2.5 N · m to 3.0 N · m (22.1 in. · lb to 26.6 in. · lb) torque Input terminal block for connecting hard-wired MAINs power to the PEP.
Note Use 14 AWG to 2 AWG wire, stripped to 14.0 mm (0.6 in.).
4 Insulator termination for Neutral 4 mm hex driver with 2.8 N · m (25.0 in. · lb) torque Isolation terminal for power input neutral wires.
5 Cable inlet grommet N/A Heyco M4860 22.0 mm to 32.0 mm (0.9 in. to 1.2 in.) grommet

RMX-10140-50Y2P Power Connection Specifications



Figure Callout Component Tool Description
1 Input protective enclosure 3 mm hex driver with 1.3 N · m (11.5 in. · lb) torque for screws Enclosure for hard-wired power connections to the PEP.
2 Earth termination mechanical lug 3/16 hex driver with 5.1 N · m (45.0 in. · lb) torque GND terminal for input power.
Note Use 14 AWG to 2/0 AWG wire, stripped to 15.7 mm (0.6 in.).
3 M6 screw thread input terminal block #2 Phillips screwdriver with 2.5 N · m to 3.0 N · m (22.1 in. · lb to 26.6 in. · lb) torque Input terminal block for connecting hard-wired MAINs power to the PEP.
Note Use 14 AWG to 2 AWG wire, stripped to 14.0 mm (0.6 in.).
4 Cable inlet grommet N/A Heyco M4860 22.0 mm to 32.0 mm (0.9 in. to 1.2 in.) grommet