Removing the ATCA-3671 Module
- Updated2023-04-11
- 1 minute(s) read
Removing the ATCA-3671 Module
- Disconnect all cables from the ATCA-3671 module.
- Loosen the four captive screws on the front panel of the ATCA-3671 module.
- Push up on the latch and rotate the ejector handle away from the module to unseat the backplane connectors to open the ejector handles.
- Carefully remove the ATCA-3671 module from the chassis. Use two hands while removing the module to ensure that the module is not dropped once it is free of the chassis.