NI-9235

Ab $3,665.00
Artikelnummer(n):
785995-01

10 kS/s/channel, 120 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input Module

Übersicht

The NI-9235 measures dynamic strain on all channels simultaneously, allowing for synchronized, high-speed measurements. This capability is important for applications, such as impact tests, that require comparison across many channels at a particular instant in time. The NI-9235 includes built-in voltage excitation for quarter-bridge sensors. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high-common-mode noise rejection and increased safety.

Enthaltene Artikel

  • Module
  • NI 9966 34-position spring terminal plug
  • Safety, Environmental, and Regulatory documentation

NI-9235 Einzelheiten

System in einem System Advisor konfigurieren
Kontaktieren
Artikelnummer​n (1) Preis
785995-01

NI Lead Time
12-13 weeks
Bridge Configurations
Quarter Bridge
Maximum Number of Differential Analog Input Channels
8
Conformal Coated
No
Analog Input Voltage Range
-29.4 mV/V to 29.4 mV/V
Enclosed
Yes
Maximum Sample Rate
10 kS/s/ch
Front Connection Type
Spring Terminal(1)
Supported Hardware Platform
C Series
Bridge Resistance
120 Ohm
Number of Analog Input Channels
8
Simultaneous Sampling
Yes
Operating Temperature Range
-40 °C to 70 °C
Bus Connection
C Series
Analog Input Isolation
60 VDC Ch-Earth Ground Isolation
Supported Sensor Type
Bridge#Strain Gauge
Produktbeschreibung
NI-9235, 8 ch, 120 ohm quarter bridge, 24-bit, 10 kS/s/ch C Series Bridge/Strain Input Module

NI-9235 Zubehör und Software

  • Produkt (Artikelnummer)
    Beschreibung
    Empfohlene Anwendungsfälle
    FlexLogger Professional (785748-3501)
    FlexLogger Professional, Subscription License, Download

    Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.

    Key Features

    • Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
    • Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
    • Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
    • Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
    • Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
    • Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
    • CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
    Produktdetails anzeigen
    LabVIEW+ Suite (788509-35)
    NI LabVIEW+ Suite, Subscription License, Download

    Recommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.

    The LabVIEW+ Suite includes the following products:

    • NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
    • NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
    • NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
    • NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
    • NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
    Produktdetails anzeigen

Ressourcen

NI-9235 Treiber-Download
NI-9235 Erste-Schritte-Anleitung(en)
NI-9235 Kalibriervorgang/-vorgänge
NI-9235 Technische Zeichnung(en)
NI-9235 Produktzertifizierung(en)
NI-9235 Volatilitätsdokument
NI-9235 Zubehörleitfaden
NI-9235 Spezifikationen

Unterstützung

Unterstützung anfordern
Sie können Reparaturen anfordern, Kalibrierungen planen oder technische Unterstützung erhalten. Unter Umständen ist dazu eine Servicevereinbarung erforderlich.
NI Community
Hier können Sie Fragen stellen, sich über Lösungen informieren und an Diskussionen mit anderen Mitgliedern der NI Community teilnehmen.
KnowledgeBase
Suchen Sie nach Antworten auf häufig gestellte Fragen und nach Tipps zur Problembehandlung bei gängigen Fehlern, die von NI-Ingenieuren verfasst wurden.
Online-Schulungen
Greifen Sie auf Hunderte von Lektionen zum Selbststudium und anwendungsorientierte Lernpfade zu, und erleichtern Sie sich den Einstieg mithilfe von Tutorials zur Produkteinrichtung.