sbRIO-9234

Ab $3,808.00
Artikelnummer(n):

Non-Enclosed, 4-Channel, 51.2 kS/s/channel, ±5 V, C Series Sound and Vibration Input Module

Übersicht

The sbRIO-9234 can measure signals from integrated electronic piezoelectric (IEPE) and non-IEPE sensors such as accelerometers, tachometers, and proximity probes. The sbRIO-9234 is also compatible with smart TEDS sensors. The sbRIO-9234 delivers a wide dynamic range and incorporates software-selectable AC/DC coupling and IEPE signal conditioning. The input channels simultaneously measure signals. Each channel also has built-in anti-aliasing filters that automatically adjust to your sample rate. When used with NI software, this module provides processing functionality for condition monitoring such as frequency analysis and order tracking. Non-enclosed modules are designed for OEM applications.

sbRIO-9234 Einzelheiten

System im CompactRIO Advisor konfigurieren
Kontaktieren
Artikelnummer​n (1) Preis
782718-01

NI Lead Time
12-13 weeks
Maximum Number of Differential Analog Input Channels
4
Conformal Coated
No
IEPE Excitation
2 mA
Analog Input Voltage Range
-5 V to 5 V
Enclosed
No
Maximum Sample Rate
51.2 kS/s/ch
Front Connection Type
BNC(4)
Analog Input Isolation
None
Supported Hardware Platform
CompactRIO
Maximum Analog Update Rate
—
Number of Analog Input Channels
4
Number of Analog Output Channels
—
Analog Output Voltage Range
—
Simultaneous Sampling
Yes
Operating Temperature Range
-40 °C to 70 °C
Bus Connection
C Series
Analog Input Coupling
AC/DC
DSA Dynamic Range
120 dB
Electrical Signal Measured
Voltage
Highpass Filter Cut-Off Frequency
0.5 Hz
Number of Gain Settings
1
Supported Sensor Type
IEPE#Accelerometer#Microphone
Produktbeschreibung
NI 9234E, 4-Ch IEPE, 24-Bit, ±5 V, Board Only Module

sbRIO-9234 Zubehör und Software

  • Modell (Artikelnummer)
    Beschreibung
    Bild
    Kompatible Artikelnummern
    BNC-BNC Coaxial Cable (779697-02)
    BNC Male to BNC Male Cable, 75 Ohm, 2 m (Quantity 4)

    Zubehör
    782718-01
    Produktdetails anzeigen
  • Produkt (Artikelnummer)
    Beschreibung
    Empfohlene Anwendungsfälle
    FlexLogger Professional (785748-3501)
    FlexLogger Professional, Subscription License, Download

    Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.

    Key Features

    • Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
    • Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
    • Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
    • Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
    • Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
    • Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
    • CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
    Produktdetails anzeigen
    LabVIEW Sound and Vibration Toolkit Full (788450-35)
    NI Sound and Vibration Toolkit Full, Subscription License, Download

    Recommended for performing audio and distortion measurements, frequency analysis, frequency response measurements, and transient analysis. Included solutions comply with evolving IEC standards. Includes 50 ready-to-run NI LabVIEW examples to help you get started with applications.

    Produktdetails anzeigen
    LabVIEW+ Suite (788509-35)
    NI LabVIEW+ Suite, Subscription License, Download

    Recommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.

    The LabVIEW+ Suite includes the following products:

    • NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
    • NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
    • NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
    • NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
    • NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
    Produktdetails anzeigen

Ressourcen

sbRIO-9234 Technische Zeichnung(en)
sbRIO-9234 Volatilitätsdokument
sbRIO-9234 Spezifikationen
sbRIO-9234 Sicherheits-, Umwelt- und regulatorische Dokumentation

Unterstützung

Unterstützung anfordern
Sie können Reparaturen anfordern, Kalibrierungen planen oder technische Unterstützung erhalten. Unter Umständen ist dazu eine Servicevereinbarung erforderlich.
NI Community
Hier können Sie Fragen stellen, sich über Lösungen informieren und an Diskussionen mit anderen Mitgliedern der NI Community teilnehmen.
KnowledgeBase
Suchen Sie nach Antworten auf häufig gestellte Fragen und nach Tipps zur Problembehandlung bei gängigen Fehlern, die von NI-Ingenieuren verfasst wurden.
Online-Schulungen
Greifen Sie auf Hunderte von Lektionen zum Selbststudium und anwendungsorientierte Lernpfade zu, und erleichtern Sie sich den Einstieg mithilfe von Tutorials zur Produkteinrichtung.