PXIe-6509
Ab $1,063.00
PXIe, 96-Channel, 5 V, TTL/CMOS, 24 mA PXI Digital I/O Module
Übersicht
The PXIe-6509 can directly drive external digital devices such as solid-state relays (SSRs). You can configure each line independently for input or output, and each 8-bit port can be independently configured with a software selectable pull-up or pull-down resistor. Using the PXIe-6509 programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators. The PXIe-6509 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. The PXIe-6509 provides programmable input filters for eliminating glitches or spikes and for debouncing digital switches or relays through a software-selectable digital filter.
Enthaltene Artikel
- Module
- Safety, Environmental, & Regulatory documentation
PXIe-6509 Einzelheiten
Artikelnummern (1) Preis | 787358-01 |
|---|---|
| NI Lead Time | 6-7 weeks |
| Bus Connector | PXI Express |
| Single-Ended Digital I/O Channel Current Drive | 24 mA |
| Digital I/O Logic Levels | 5 V |
| Number of Digital Input Only Channels | 0 |
| Number of Digital Output Only Channels | 0 |
| Number of Bidirectional Digital Channels | 96 |
| Digital Input Voltage Range | 0 V to 5 V |
| Output Voltage Range | 0 V to 5.5 V |
| Maximum Clock Rate | — |
| Signaling Type | Single-Ended |
| Reconfigurable | — |
| Maximum Sample Rate | — |
| Number of Analog Input Channels | — |
| Maximum Digital Update Rate | — |
| Maximum Analog Update Rate | — |
| Number of Analog Output Channels | — |
| Operating Temperature Range | — |
| Bus Connection | PXI Express |
| Current Flow Direction | — |
| Digital I/O Isolation | — |
| Front Connection Type | SCSI Type(1) |
| Number of Counters/Timers | — |
| Number of External Clock Inputs | — |
| Relay Type | — |
| Supports Peer To Peer Streaming | — |
| Supported Hardware Platform | PXI |
| Digital I/O Termination | — |
| Duplex | — |
| Dynamic RAM (DRAM) | — |
| Maximum Acquisition Rate | — |
| Maximum Generation Rate | — |
| Maximum Active Load | — |
| Maximum Data Rate | — |
| Module Width | 1 |
| Onboard Memory | — |
| Supports Hardware Compare | — |
| Supports PMU | — |
| Produktbeschreibung | PXIE-6509, 96-CH 5V/TTL/CMOS (24MA) DIGITAL I/O MODULE |
PXIe-6509 Zubehör und Software
- Modell (Artikelnummer)BeschreibungBildKompatible ArtikelnummernSH100M-100M Flex Cable (185095-01)Cable Assy, Type SH100-100-Flex, 1 m787358-01R100M-50F-50F Cable (182762-02)R1005050 Ribbon Cable, 2 m787358-01
- Modell (Artikelnummer)BeschreibungBildKompatible ArtikelnummernSCB-100A (785024-01)SCB-100A Noise Rejecting, Shielded I/O Connector Block787358-01CB-50 (776164-90)CB-50 I/O Connector Block with DIN Rail Mounting without cable787358-01CB-50LP (777101-01)CB-50LP Low-Cost, Unshielded I/O Connector Block787358-01
- Produkt (Artikelnummer)BeschreibungEmpfohlene AnwendungsfälleFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Ressourcen
Unterstützung
Unterstützung anfordern
Sie können Reparaturen anfordern, Kalibrierungen planen oder technische Unterstützung erhalten. Unter Umständen ist dazu eine Servicevereinbarung erforderlich.
NI Community
Hier können Sie Fragen stellen, sich über Lösungen informieren und an Diskussionen mit anderen Mitgliedern der NI Community teilnehmen.
KnowledgeBase
Suchen Sie nach Antworten auf häufig gestellte Fragen und nach Tipps zur Problembehandlung bei gängigen Fehlern, die von NI-Ingenieuren verfasst wurden.
Online-Schulungen
Greifen Sie auf Hunderte von Lektionen zum Selbststudium und anwendungsorientierte Lernpfade zu, und erleichtern Sie sich den Einstieg mithilfe von Tutorials zur Produkteinrichtung.