The table below describes the following National Instruments products and their support for automotive standards.
Standards Body | Standard | Description | Software Tool | NI ADE Support | ||||
NI LabVIEW | NI VeriStand | NI LabWindows /CVI | NI DIAdem | C/ C++ | ||||
ASAM | MCD-1 | CCP/XCP | ECU M&C | ![]() |
![]() |
![]() |
![]() |
![]() |
MCD-2 NET | FIBEX 3.1 | NI-XNET | ![]() |
![]() |
![]() |
![]() |
![]() |
|
MCD-2 MC | A2L, ASAP2 | ECU M&C | ![]() |
![]() |
![]() |
![]() |
![]() |
|
MCD-3 | ASAP3 | ![]() |
![]() |
|||||
ODS | Offline Data Storage | AOP5 DataPlugin | ![]() |
![]() |
||||
ISO | 15765-3 | UDS | ADCS | ![]() |
![]() |
![]() |
![]() |
|
15765-2 | ISO TP | ADCS | ![]() |
![]() |
![]() |
![]() |
||
14230-3 | KWP2000 | ADCS | ![]() |
![]() |
![]() |
![]() |
||
13400 | Diagnostics over IP (DoIP) | ADCS | ![]() |
![]() |
![]() |
![]() |
||
15031-5 | On- board Diagnostics (OBD) | ADCS | ![]() |
![]() |
![]() |
![]() |
||
11898-2 | High- Speed CAN | NI-XNET, NI-CAN | ![]() |
![]() |
![]() |
![]() |
![]() |
|
11898-3 | Low- Speed/ Fault- Tolerant CAN | NI-XNET, NI-CAN | ![]() |
![]() |
![]() |
![]() |
![]() |
|
SAE | J1939 | Heavy Duty Network on CAN | NI-XNET, NI-CAN | |
|
|||
J2411 | Single- Wire CAN | NI-XNET, NI-CAN | ![]() |
![]() |
![]() |
![]() |
||
J2602 | LIN 2.0 | NI-XNET | ![]() |
![]() |
![]() |
![]() |
![]() |
|
ATA American Trucking Org. | RP1210 | Hardware Abstraction for J1939 | On NI Labs for use with 847x interfaces | ![]() |
||||
N/A | VW TP 2.0 | Diagnostic Transport Protocol | ADCS | ![]() |
![]() |
![]() |
![]() |
|
N/A | DBC | Network Database File | NI-XNET, NI-CAN | ![]() |
![]() |
![]() |
![]() |
![]() |
N/A | MDF 3.x | Streaming Data Format | MDF Data Plugin | ![]() |
![]() |
Network Standard | Protocol/ Description File Formats | Driver | NI ADE Support | ||||
NI LabVIEW | NI VeriStand | NI LabWindows™/CVI | NI DIAdem | C/C++ | |||
CAN 2.0a, 2.0b | High-Speed, Low-Speed/Fault-Tolerant, Single-Wire/DBC, FIBEX, NCD | NI-XNET, NI-CAN | ![]() |
![]() |
![]() |
![]() |
![]() |
LIN 1.3, 2.0, 2.1 | Local Interconnect Network/LDF, FIBEX | NI-XNET, NI-CAN | ![]() |
![]() |
![]() |
![]() |
![]() |
FlexRay 2.1 | FIBEX 2.x, 3.1 | NI-XNET | ![]() |
![]() |
![]() |
![]() |
![]() |
Notes:
ADCS = NI Automotive Diagnostic Command Set
ECU M&C = NI ECU Measurement and Calibration Toolkit
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.