NI-Industrial Communications for EtherNet/IP and LabVIEW on Windows Compatibility

Overview

This page shows supported versions of NI-Industrial Communications for EtherNet/IP with LabVIEW (LabVIEW and LabVIEW Real-Time Module) development systems on a Windows operating system. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

NI-Industrial Communications for EtherNet/IP and LabVIEW on Windows Compatibility

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare NI-Industrial Communications for EtherNet/IP and LabVIEW on Windows Compatibility
NI IndCom for EtherNet/IPLabVIEW / LabVIEW Real-Time Version
2021202020192018201720162015201420132012 SP1
21.0         
20.0          
19.0          
18.0          
17.0          
16.0          
15.0          
14.0          
1.3          
1.2.1          


Note: Starting with LabVIEW 2013, all minor versions of LabVIEW (ex: 2013 SP1) are compatible with the same version of the NI-Industrial Communications for Ethernet/IP driver as the corresponding major versions. For example, LabVIEW 2014 SP1 is compatible with the same driver as LabVIEW 2014 (version 14.0).

NI Linux Real Time

Phar Lap ETS RT

Was this information helpful?

Yes

No