The following items are known issues in InsightCM 3.4 sorted by Category.
ID | Known Issue | |||||
---|---|---|---|---|---|---|
InsightCM Monitoring Devices | ||||||
727573 Return | InsightCM does not warn user that calculated MCSA features cannot be used for gating and delta EU Using calculated features from an MCSA asset for gating conditions or delta EU triggers will cause an invalid configuration. InsightCM currently does not notify the user of this when creating the asset configuration. Workaround: N/A
| |||||
InsightCM Web Application | ||||||
680791 Return | Users are unable to create Baselines Data Events for Thermal Camera ROI and Delta Features . Workaround: N/A
| |||||
682841 Return | Device Dashboard does not show alarms on integrated features Workaround: Use the Alarm Tab on the primary Dashboard page.
| |||||
686624 Return | Server-only Features are selectable as Delta EU Operating State Triggers Users can specify these server calculated only features as a source for delta EU triggers. Features that are calculated on the server only (such as the envelope bands) cannot trigger a delta EU data collection. Workaround: Do not use server calculated only features as Operating State triggers.
| |||||
731674 Return | Order Waveform and Spectrum viewers don't display data if there are only two tachometer pulses When doing slow roll compensation in order waveform or order spectrum viewers, an error is returned if there is only one revolution in the slow roll data. Workaround: N/A
| |||||
735127 Return | OPC Historian does not start after upgrade or fresh install If you have not selected an OPC security policy besides "None", the OPC Historian will be unable to start. Workaround: Select an OPC security policy on the InsightCM Options page. If you do not want any additional security policies selected, you can then deselect all policies besides "None". The OPC Historian should start after restarting the server.
|
Document last updated on 05/02/2019