From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
The following items are Bug Fixes in LabVIEW 2015 SoftMotion Module.
ID | Fixed Issue | Issue Details |
---|---|---|
231035 | You can preempt a coordinate move with an axis move. | SoftMotion allows you to preempt a coordinate move with an axis move. This is unsupported and can lead to undesired effects on the motion system. |
356790 | Clearing a fault on an axis in a coordinate space causes the axis to re-enable | If you perform a coordinate space enable and an axis in the coordinate space gets a fault, upon clearing the fault, the axis automatically re-enables. |
342652 | Disabling or Enabling one axis in a coordinate space will disable or enable all axes. | If you perform a move on a coordinate space and then enable or disable an individual axis, all other axes in the coordinate space will enable or disable. |
342896 | Disabling an axis in a coordinate space can cause a timeout error. | If you have two or more axes in a coordinate space and you use the Power function block, express VI, or method to enable the coordinate space, you will get error -70027 when trying to disable any individual axis. You will still be able to disable all of the axes together. |