Metadata-Version: 1.2
Name: network-dev-config
Version: 1.0.13
Summary: NI Expansion I/O RSTP Reconfigurator
Home-page: http://dashboard/ni-pypi-docs/network_dev_config-0.1.0d0
Author: National Instruments
Author-email: no-reply@ni.com
License: UNKNOWN
Description: network_dev_config
        ==================
        
        This is a simple command-line utility for performing network configuration on
        an NI cDAQ-9185/89, FieldDAQ, or cRIO-9805 device through its NETCONF
        interface.
        
        NETCONF is an IETF-standardized network management protocol.
        
        The NETCONF interface was added to the cDAQ-9185/89 and FieldDAQ products
        in firmware version 19.5. This program will not work on a cDAQ-9185/89 or
        FieldDAQ with an earlier version; consult your product documentation to
        update the firmware on your device.
        
        
        Usage
        =====
        
        network_dev_config [-h] [--username USERNAME] [--password PASSWORD]
                           [--timeout SECONDS]
                           (--rstp {query,enable,disable} |
                           --discover |
                           --update_password NEW_PASSWORD |
                           --query_device_info |
                           --reset |
                           --version)
                           [hostname]
        
        Common options
        --------------
        
          hostname              hostname of device
        
             The default hostname is the model number, a hyphen, and the serial
             number, for example, "cDAQ9185-4E8924A" or "cRIO9805-4898E28".
        
          --username USERNAME   login username
          --password PASSWORD   login password
        
             The utility will use the default credentials of a cDAQ/FieldDAQ device
             if unspecified (username of "admin" with a blank password). A cRIO-9805
             device ships with a random default password assigned at manufacturing
             time.
        
             If the credentials have changed from the defaults, the --username and
             --password options can be used to instruct the client how to log in.
        
             If --username is specified but a --password is not, then the password
             will be prompted for on standard input.
        
        Device discovery
        ----------------
        
          --discover            output hostnames for devices discovered via mDNS
          --timeout SECONDS     timeout (s) for device discovery
        
             NETCONF devices supported by this utility advertise the capability
             via the _netconf._tcp service in Multicast DNS.
        
        Updating password
        -----------------
        
          --update_password NEW_PASSWORD
                                change password to NEW_PASSWORD
        
        Changing Rapid Spanning Tree Protocol state
        -------------------------------------------
        
          --rstp {query,enable,disable}
                                get/set Rapid Spanning Tree Protocol state
        
             The RSTP configuration persists through device restarts. It is reset to
             the default setting on factory reset. Consult your product documentation
             for the factory reset procedure.
        
        Retrieving device information
        -----------------------------
        
          --query_device_info   query device information
        
             Returns the model name and firmware version of the device.
        
        Reset the device
        ----------------
        
          --reset               reset device
        
             Reset the device.
        
        Miscellaneous options
        ---------------------
          -h, --help            show this help message and exit
          --version             show program's version number and exit
        
        
        Further Reading
        ===============
        See https://ni.com/r/netconfig
        
        Licenses
        ========
        See LICENSE.txt and THIRD-PARTY-LICENSES.txt.
        
Platform: UNKNOWN
Classifier: Topic :: Utilities
Requires-Python: >=3.2
