NI-DAQ Driver Support: Plug and Play ISA/PC/AT

Publish Date: Nov 12, 2014 | 3 Ratings | 3.33 out of 5 |  PDF

Overview

This article has been archived and is no longer updated by National Instruments

The following table lists the latest DAQ driver that is supported for various National Instruments Plug and Play ISA/PC/AT data acquisition devices. The table also shows which driver can be used with Windows, Linux, Real-Time or Mac OS X.

Table of Contents

  1. NI-DAQ Driver Support: Plug and Play ISA/PC/AT Devices

1. NI-DAQ Driver Support: Plug and Play ISA/PC/AT Devices

NI-DAQ Driver Support: Main Page

Table of Contents

  1. Table Key
  2. E Series Multifunction DAQ
  3. Multifunction DAQ
  4. Analog Output
  5. Digital Input/Output
  6. Modular Instruments (High Speed Digitizers, DSAs, Etc)
  7. Notes

Table Key 

 B Device works with NI-DAQmx Base
 T Device works with Traditional NI-DAQ (Legacy)
 mx Device works with NI-DAQmx
 NS Device works with NI-Switch
 X Not Supported
 * AI only

 

Device Table

Device Windows LabVIEW RT Linux Mac
E Series Multifunction DAQ Vista x64 Vista x86 XP 2000 NT 2 98/Me 95 Pharlap4 Linux3 OS X
NI-6011E (NI AT-MIO-16-XE-50) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6020E (NI AT-MIO-16E-10) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6021E (NI AT-MIO-16DE-10) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6030E (NI AT-MIO-16XE-10) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6032E (NI AT-AI-16XE-10) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6060E (NI AT-MIO-16E-2) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6061E (NI AT-MIO-64E-3) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI 6070E (NI AT-MIO-16E-1) X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
Multifunction DAQ Vista x64 Vista x86 XP 2000 NT 2 98/Me 95 Pharlap4 Linux3 OS X
NI Lab-PC-1200 X X 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T X X
NI Lab-PC-1200AI X X 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T X X
NI PC-LPM-16PNP X X 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T X X
NI PC-516 X X 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T X X
Analog Output Vista x64 Vista x86 XP 2000 NT 2 98/Me 95 Pharlap4 Linux3 OS X
NI PCAO-2DC X X 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T X X
Digital Input/Output Vista x64 Vista x86 XP 2000 NT 2 98/Me 95 Pharlap4 Linux3 OS X
NI AT-6533 X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI PC-DIO-24PNP X X X 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI PC-DIO-96PNP X X 7.4.4T 7.4.4T 7.4T 7.1T 6.9.3T 7.4.4T X X
NI PC-OPDIO-16 X X 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T 6.9.3T X X
Modular Instruments Vista x64 Vista x86 XP 2000 NT 2 98/Me 95 Pharlap4 Linux3 OS X
NI AT-4350 X X X 7.4.4T 7.4T 7.1T 6.9.3T X X X

 

Notes 

1. PCI, PXI, PCIe and PXIe - Devices listed by NI [Family Number] are available in both PCI and PXI Bus architectures. Devices listed with NI PXI- or NI PCI- before the number are available in that specific Bus architecture only. For Example, the Counter/Timers listing for the NI PCI-6601, NI 6602, NI 6608 indicates the NI 6601 is only available for the PCI Bus but the NI 6602 and NI 6608 are available for both the PCI and PXI Bus architectures.  PXIe and PCIe devices are always listed separately.

2. NI-DAQ 6.9.3 or Earlier requires NT Service Pack 4 or greater. NI-DAQ 7.x (Traditional and mx) requires NT Service Pack 6 or greater.

3. For information on supported Linux distributions, visit /linux/support.htm#1 or see the driver readme file.

4. The host system must also support the version of NI-DAQ listed. NI-DAQmx for LabVIEW RT is only supported on Pharlap RT Systems with LabVIEW RT installed.

Back to Top

Bookmark & Share


Ratings

Rate this document

Answered Your Question?
Yes No

Submit