NI System Driver Set November 2018

Publish Date: Nov 20, 2018 | 0 Ratings | 0.00 out of 5 | Print

Table of Contents

  1. November 2018 Release
  2. System Driver Set Contents
  3. System Requirements
  4. Additional Requirements for Specific Features
  5. Product Security and Critical Updates
  6. Automating the Installation of NI Products
  7. Using NI Software with Microsoft Windows 10
  8. Using NI Software with Microsoft Windows 8.1
  9. Legal Information

1. November 2018 Release

Back to Top

2. System Driver Set Contents


  • Data Acquisition
    • NI-DAQmx 18.1
  • Instrument Control
    • NI-488.2 17.6
    • NI-VISA 18.0
    • NI-Serial 17.5
    • IVI Compliance Package 18.0
    • NI-PXImc 16.0
    • PXI Platform Services 18.1.0
    • NI-VXI 16.0
  • Modular Instruments
    • NI-Switch 18.0
    • NI-DMM 18.1
    • NI-Scope 18.6
    • NI-RFSA 18.1
    • NI-PXI-5660 Support
    • NI-FGEN 18.1
    • NI-DCPower 18.1.1
    • NI-RFSG 18.1
    • NI-HSDIO 18.0
    • NI-5690 18.0
    • NI-VNA 18.0
    • NI-Digital Pattern Driver 18.0
  • Timing & Synchronization
    • NI-Sync 18.0
    • NI-TimeSync 18.1
    • NI 1588-2008 Network Management 18.1
  • Reconfigurable IO
    • CompactRIO 18.1
    • R Series 18.0
    • NI-FlexRIO 18.1
    • NI-FlexRIO Adapter Module Support 18.1
  • Motion
    • NI-Motion 18.0
  • Vision Acquisition Software
    • NI-IMAQ 18.0
    • NI-IMAQdx 18.0
  • Real-Time and Embedded
    • NI-488.2 17.6
    • NI-Serial 17.5
    • NI-Watchdog 18.0
  • Communication Buses and Protocols
    • NI-XNET 18.0
    • NI-CAN 18.0
    • NI-Industrial Communications for CANopen 18.0
    • NI-Industrial Communications for DeviceNet 18.0
    • NI-Industrial Communications for EtherCAT 18.0
  • Configuration and Utilities
    • NI I/O Trace 18.0
    • NI Measurement & Automation Explorer 18.0
    • NI System Configuration 18.1

Back to Top

3. System Requirements

This installation requires one of the following Microsoft operating systems:

  • Windows Server 2008 R2 (64-bit)
  • Windows Server 2012 R2 (64-bit)
  • Windows 7 SP1 x86
  • Windows 7 SP1 x64
  • Windows 8 x86
  • Windows 8 x64
  • Windows 8.1 x86
  • Windows 8.1 x64
  • Windows 10 x86
  • Windows 10 x64

This installation requires that version 3.1 of the MSI (Windows Installer) Engine is installed on your computer. If you do not have MSI 3.1 or later, the installer updates the engine automatically and might require you to restart your computer.

Back to Top

4. Additional Requirements for Specific Features

Certain features in this installation have additional requirements.

Feature Additional System Requirements NI Software Requirements
Visual C++ 2008 support for Visual Studio 2008 (Legacy):
  • NI-DAQmx
  • NI-488.2
  • NI-VISA
None Measurement Studio Visual C++ support for Visual Studio 2008
.NET Framework 4.5.1 support for:
  • NI-DAQmx
  • NI-488.2
  • NI-VISA
Microsoft .NET Framework 4.5.1  
.NET Framework 4.5 support for:
  • NI-DAQmx
  • NI-488.2
  • NI-VISA
Microsoft .NET Framework 4.5  
.NET Framework 4.0 support for:
  • NI-DAQmx
  • NI-488.2
  • NI-VISA
Microsoft .NET Framework 4.0 or .NET Framework 4.5  
.NET Framework 3.5 support for:
  • NI-DAQmx
  • NI-488.2
  • NI-VISA
Microsoft .NET Framework 3.5  
LabWindows™/CVI™ Support for:
  • NI-XNET
None LabWindows/CVI 8.5 or later
LabWindows™/CVI™ Support for:
  • NI-DAQmx
  • NI-CAN
  • NI-DNET
None LabWindows/CVI 7.0 or later

Measurement Studio 2009 is the last version of Measurement Studio to provide support for Visual C++ MFC. If you want to continue building or developing applications using Visual C++ MFC, order the Measurement Studio 2009 product. For additional information, refer to ni.com/mstudio/legacysupport.

Back to Top

Back to Top

5. Product Security and Critical Updates

Visit ni.com/security to view and subscribe to security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Back to Top

Back to Top

6. Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

Back to Top

7. Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Back to Top


Back to Top

8. Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

Back to Top

Back to Top

9. Legal Information

Copyright

© 2002–2018 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
  • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
  • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

 

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

For LabVIEW version compatibility please see the system driver set main page.

Back to Top

Bookmark & Share


Downloads


Ratings

Rate this document

Answered Your Question?
Yes No

Submit