Print
PDFTable of Contents
Overview
The OFDM example generates baseband complex waveform based on OFDM modulation. This is a very general tool that simulates most of OFDM systems currently in use or under development. For proper generation of the OFDM signal a number of parameters need to be configured. For example, the final payload in the OFDM Frame may consist of a number of OFDM Symbols and each OFDM symbol may use different modulation schemes. The example vi facilitates configuration of OFDM parameters in a series of steps. For example, different data sources may be configured by executing STEP 1, as shown in Fig. 1.
Figure 1: Front Panel of proposed example VI
After completing the Steps 0 through 6, the OFDM signal is generated which can be stored in Datalog file for future reference.
Example Code
LabVIEW Modulation Toolkit OFDM Example
Related Products
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).