Print
PDFOverview
This page contains links to FPGA IP designed to work with the NI PXIe-5644R Vector Signal Transceiver. While it has been validated with the NI PXIe-5644R, it is hardware-agnostic, meaning it will work with other FPGA targets as well. It is also distributed as IP only, requiring integration with either the Simple VSA/VSG or Streaming LabVIEW sample project, or both.
Simple VSA/VSG Sample Project
This IP has been validated to work with the NI PXIe-5644R Simple VSA/VSG LabVIEW sample project.
 |
FPGA Power Measurement and Gain Adjust This IP implements FPGA-based power measurement and gain adjustment, necessary for hardware power leveling in RF power amplifier test. |
 |
I2C and SPI Controllers This IP implements I2C and SPI controllers which can be deployed to the VST FPGA for deterministic DUT control. |
Streaming Sample Project
This IP has been validated to work with the NI PXIe-5644R Streaming LabVIEW sample project.
 |
Real-Time Channel Emulation This IP implements waveform convolution for applying a continuous fading profile, as well as Doppler shift and AWGN. It is scalable for either higher fidelity SISO models or can be distributed across multiple MIMO channels, receiving data from other instruments through peer-to-peer data streaming. |
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).