Print
PDFOverview
The following videos are part of the Getting Started with Instrument Control series and will assist you in the Set-up and Configuration of your Ethernet/LAN connected stand-alone instrument in the Windows, Mac, and Linux OSs.
Getting Started with
Instrument Control
Choose the Operating System you are using with your Ethernet/LAN connected stand-alone instrument.
Return to the Getting Started with Instrument Control home page to access additional getting started videos and instrument control support resources.
Go to the NI LXI (LAN eXtensions for Instrumentation) home page for more information on LXI.
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).