Install NI Software for Your CompactRIO System

Publish Date: Dec 13, 2017 | 0 Ratings | 0.00 out of 5 | Print | Submit your review

Overview

A CompactRIO System consists of three main components:

  • CompactRIO Controller (Real-Time Processor)
  • CompactRIO Chassis (FPGA)
  • C Series Modules (Inputs and Outputs)

Installing NI software onto your PC is the first step in setting up a CompactRIO System.

This page is part of a walkthrough on Setting Up Your CompactRIO System.

Table of Contents

  1. Host PC Software Compatibility
  2. Installing Software With the LabVIEW Platform Media
  3. Additional Resources

1. Host PC Software Compatibility

CompactRIO is programmed using LabVIEW system design software. Since CompactRIO is a distributed real-time system, it uses the LabVIEW Real-Time Module and, optionally, the LabVIEW FPGA Module. CompactRIO also requires that you install the NI CompactRIO Device Drivers on your development PC to support the various CompactRIO real-time controllers, reconfigurable chassis, and C Series modules. This same installation procedure applies for Single-Board RIO (sbRIO).

The following software is required for programming a CompactRIO System:

  • LabVIEW Full or Professional Development System
  • LabVIEW Real-Time Module
  • LabVIEW FPGA Module (recommended)
  • NI CompactRIO Device Drivers

You can install the latest version of each of these software components separately from ni.com then Download your Free Evaluation of LabVIEW or install them from the USB media provided with the NI Embedded Control and Monitoring Software Suite

Note: If you are not using the USB media, you should install the software in the order listed above. 

Note: Before installing software, refer to  Preventing Software Compatibility Issues with CompactRIO to ensure that the hardware you use is compatible with the software you plan to install.

 

Back to Top

2. Installing Software With the LabVIEW Platform Media

  1. Connect the USB media to your PC and wait for the autorun screen to pop up. Select the Install LabVIEW, Modules, and Toolkits option. If you receive a Windows warning asking if you want to continue, click Yes.
  2. Select Install LabVIEW 2017 or Install both LabVIEW 2017 and LabVIEW NXG 1.0 if you are going to be using LabVIEW NXG as well.
    1. Figure 1. Product Selection
  3. Choose whether you want to enter serial numbers to install products you have purchased or to install the software for you in evaluation mode. If you choose to enter serial numbers, the installer can select the appropriate software to install for you. 
  4. Click Next. If you choose to evaluate products proceed to Step 9.
    1. Figure 2. Activation or Evaluation Mode
  5. Enter serial numbers for the LabVIEW development system you have purchased. 
  6. Click Next. If you have serial numbers for LabVIEW add-ons, such as modules and toolkits, you can also enter these now. You can find serial numbers on your software packaging by referencing Where Do I Find the Serial Number of My NI Product?.
    1. Figure 3. Serial Number Input
  7. Review the Licensed Product List, which includes the LabVIEW environment, modules, and toolkits you have valid licenses for in addition to device drivers. 
  8. Then click Next
  9. Click to expand the Embedded Development and Deployment folder. 
  10. Select the Real-Time and FPGA arrows. Click Install
  11. Select any additional products to install for evaluation from the Evaluation Product List. 
  12. Click Next. The installer checks for patches or updates relevant to the products you are about to install. You can download the updates before continuing with the installation.
    1. Figure 4. Software Selection
  13. Click Next
  14. Choose the installation directory for NI software. 
  15. Click Next.
  16. Accept the License Agreement(s).
  17. Click Next.
  18. Log in to your ni.com User Profile or create a new one. This information is used to complete your software registration. A User Profile is not required if you are evaluating the product.
  19. Review the summary before continuing to ensure all desired products will be installed. Products listed with (User interaction required), such as device drivers, require user interaction like inserting different media to complete. Otherwise, you may leave the installation unattended.

 

After you finished installing NI software on your CompactRIO system, you need to connect your CompactRIO system to a PC.

 

Back to Top

3. Additional Resources

 

 

 

 

Back to Top

Bookmark & Share


Ratings

Rate this document

Answered Your Question?
Yes No

Submit