Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Configuring the Ethernet Adapter on Your Windows 95/98 VXI/VME or PXI Embedded Controller

This document describes how to install the integrated ethernet adapter on your Windows 95/98 PXI or VXI/VME controller.

Some of the information in this document is only applicable to specific controller models. Device specific information is identified as such.

Note: This document does not discuss configuring the ethernet adapter on the PXI-8210. Refer to the PXI-8210 user manual for more information on configuring the PXI 8210 Ethernet and SCSI adapter. This document also does not discuss the installation or configuration of any network protocols, such as TCP/IP.


VXIpc-870 and VXI/VMEpc 600 Series Controllers
These models use a plug and play Symbios 53C885 ethernet adapter. No user intervention is required to configure this ethernet adapter - Windows 95/98 will automatically recognize and configure this ethernet adapter.


VXIpc-800 Series, VXIpc-745, PXI-815XX Series Controllers
These controllers use a SMC 9000 legacy ISA ethernet adapter. This ethernet adapter may be configured for use in Windows 95/98 by following the steps outlined below.

  1. Double click on the Network icon in the Control Panel.


  2. Select Add from the Network Configuration tab dialog.


  3. Select Adapter as the network component type.


  4. Select the Have Disk option. Windows will prompt you to enter the path to the directory containing the driver for the ethernet driver.

    The file path that you should use for each of the VXI/VME and/or PXI controllers is shown in the table below.

    Controller

    Path to driver for ethernet adapter

    PXI-8156

    c:\/images/support/us/vxi_network_images\pxi815x\enet\win95

    PXI-8156B

    c:\/images/support/us/vxi_network_images\pxi815xb\enet\win95

    VXIpc-860

    c:\/images/support/us/vxi_network_images\vxi8x7x\enet\win95

    VXIpc-850

    c:\/images/support/us/vxi_network_images\\vxi8x7x\enet\win95

    VXIpc-745

    c:\/images/support/us/vxi_network_images\vxi8x7x\enet\win95

    You will be able to browse to this directory.

  5. Select SMC 9000 Ethernet Adapter from the list of SMC network adapters.

  6. Complete the installation process and proceed to install and configure any network protocols you require.


Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality?   Answered Your Question? 
  1 2 3 4 5
Please Provide Additional Feedback below
Please visit Request Support for product support inquiries. submit