Networking Your VXI/VME/PXI Embedded Controller

Windows 95/98

• Configuring and Installing the integrated ethernet adapter on your Windows 95/98 PXI or VXI/VME embedded controller



• Installing TCP/IP support on your Windows 95/98 VXI/VME or PXI controller with integrated ethernet adapter

Windows NT

• Configuring and Installing the integrated ethernet adapter on your Windows NT PXI or VXI/VME embedded controller
  
  
• Installing TCP/IP support on your Windows NT VXI/VME or PXI controller with integrated ethernet adapter

Linux (VXIpc-870 only)

1. Log onto the system with root level priveleges.
   
   
2. Run the Linux network configuration program, netconf.
   
   
3. Select the "Basic Host information" section.
   
   
4. Set the "kernel module" option under Adapter 1 configuration settings to "yellowfin". This may not be listed as an option, in which case you can type it in.

Refer to the Linux documentation for additional information.

PXI-8210, PXI-8211, & PXI-8212

• Configuring your Windows 98/95/NT PXI controller to use the PXI-8210 SCSI and Ethernet adapter
• Configuring your Windows 98/95/NT PXI controller to use the PXI-8211 Ethernet adapter
• Configuring your Windows 98/95/NT PXI controller to use the PXI-8212 GPIB and Ethernet adapter

Download Drivers

• Download Peripheral drivers for all PXI Controllers