SCXI & Signal Conditioning Support
Equipment for 5B Installation
- One or more of the following modules: 5B30, 5B31, 5B40, 5B41, 5B32, 5B34, 5B37, 5B39, 5B49, 5B47, 5B38, 5B45, 5B46.
- A 5B01 or 5B08 backplane.
- One of the DAQ cards in the table below.
- An SC-205X board or NB-9 cable depending on your data acquisition (DAQ) board (see the table below).
Note: The NB-9 cable can replace some 205X boards. See the user manual.
SC-205X Adapter: used with analog input modules, and up to 2 analog output modules
Your DAQ
Board |
SC-205X
Input/Output
Connector Board |
Direct Cabling
(INPUT Only) |
NB-MIO-16
NB-MIO-16X
MC-MIO-16
AT-MIO-16
AT-MIO-16D*
AT-MIO-16F-5
AT-MIO-16X
AT-MIO-64F-5
MIO/AI E Series
|
SC-2050 |
68F-50M MIO adapter
and NB9 cable |
| DAQCard E Series |
SC-2050 |
PSHR68-68M, 68F-50M MIO
adapter, and NB9 cable |
Lab-LC**
Lab-NB
Lab-PC+
DAQPad-1200
DAQCards-1200
Lab/1200 Series
PC-A0-2DC
|
SC-2053 |
PC-LPM-16
DAQCard-700 |
SC-2055 |
AT-MIO-64E-3
PCI-6031E
PCI-6033E
PCI-6071E |
SC-2056 |
* Requires a type NB5 100-conductor ribbon cable
** Requires a type NB10 ribbon cable
