FieldPoint Installation/Configuration Troubleshooter

	Your hardware cannot be configured until it has been properly set up on a network or connected to your computer. If you have not installed your FieldPoint hardware yet, then please begin with the FieldPoint Manual before configuring it.

Configuration Procedure

• Ethernet Network Module
  
  
• Serial Network Module
  

Using FieldPoint

• Utilizing FP-20xx Network Modules with LabVIEW Real-Time
  
  
• Using LabVIEW to Collect Data from FieldPoint Modules
  
  
• Using FieldPoint OPC Server with the LabVIEW DSC Module
  
  
• Developer Zone Category: Distributed I/O (FieldPoint)

Common Problems

• Ethernet Network Module
  
  
• Serial Network Module