From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
September 2017
This file contains important information about the cRIO-9951 Module Development Kit 2.1, including product support and new features for RIO 17.6.
Product Security and Critical Updates
The CompactRIO Module Development Kit 2.1 (MDK 2.1) consists of two main software components. The first component is the C Series Communication Core that communicates with the C Series module hardware. The second component gives third party module developers the ability to script their own Module Support VIs beneath I/O, method, and property nodes.
The MDK 2.1 supports the following application software versions, including service packs.
| Application Software | Versions Supported by Product |
|---|---|
| LabVIEW | 2017 SP1 |
| LabVIEW Real-Time Module | 2017 |
| LabVIEW FPGA Module | 2017 |
| CompactRIO Device Drivers | 17.6 |
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
You can find a description of new changes for MDK 2.1 in the cRIO-9951 User Manual on ni.com/manuals.
You can find a description of behavior changes for MDK 2.1 in the cRIO-9951 User Manual on ni.com/manuals.
Registered users can find product support, including known issues and best practices, at the cRIO Module Developers Kit board at forums.ni.com.
Navigate to C:/Users/Public/National Instruments/CompactRIO/CompactRIO MDK 2.1/Examples to find LabVIEW examples for the MDK 2.1. You can modify an example to fit an application, or you can copy and paste from one or more examples into Module Support.
Copyright
©2017 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the NI Alliance Partner Program are business entities independent from NI and have no agency, partnership, or joint-venture relationship with NI.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
377362A-01