From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
July 2014
Thank you for using the Phase Matrix PXI-1470 Support software. This file contains important information about the PXI-1470 Support software and is organized into the following sections:
Uninstalling PXI-1470 Support Software
Note Refer to the NI RF Vector Signal Analyzers Readme for information about the following items:
PXI-1470 Support software adds support to NI-RFSA for the Phase Matrix PXI-1470 Vector Signal Analyzer. PXI-1470 Support requires prior installation of NI-RFSA 2.9 or later.
The Phase Matrix PXI-1470 26.5 GHz vector signal analyzer is supported in Windows 8.1 (32-bit and 64-bit)/8 (32-bit and 64-bit)/7 (32-bit and 64-bit)/Vista (32-bit and 64-bit)/Windows XP1.
1 MXI Express and MXI-4 are supported on Windows 8.1/8/7/Vista/XP, but MXI-3 is supported on only Windows XP.
Device-specific information about this module is included in the Phase Matrix PXI-1470 Getting Started Guide.
PXI-1470 Support software 1.0.0 and later supports the following operating systems:
Note PXI-1470 Support software does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.
Refer to the Phase Matrix PXI-1470 Getting Started Guide for software and hardware installation instructions.
Note To use the PXI-1470, you must associate the modules by using the Driver Setup string. Refer to the Phase Matrix PXI-1470 Getting Started Guide for information about associating the modules.
The documentation set for the PXI-1470 is composed of the following documents.
| Document | Format | Description | Installed Location |
|---|---|---|---|
| Phase Matrix PXI-1470 Getting Started Guide | Printed and PDF | Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device. | <IVIROOTDIR32>\Drivers\ni1470\documentation |
| Phase Matrix PXI-1470 Specifications | Lists technical specifications for your device. | <IVIROOTDIR32>\Drivers\ni1470\documentation\specifications | |
| PXI-1470 Support Software Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, known issues, and legal notices. | <IVIROOTDIR32>\Drivers\ni1470\documentation |
<IVIROOTDIR32> is an alias for the following National Instruments file folder location:
| Note | $(IVIROOTDIR32) is configured as an environment variable on the target system. |
If you upgraded an installation of IVI, your files may be located in the following location:
|
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Note To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.
Visit ni.com/critical-updates for information about critical updates and security notifications from National Instruments.
To uninstall PXI-1470 Support, you must uninstall each of the following components using the procedure corresponding to your operating system.
For Windows XP, complete the following steps:
For Windows 7/Vista, complete the following steps:
For Windows 8.1/8, complete the following steps:
Note Do not attempt to uninstall by manually deleting files.
You can access the software and documentation known issues list online. Refer to PXI-1470 1.0 Known Issues at ni.com for an up-to-date list of known issues for the Phase Matrix PXI-1470 vector signal analyzer and PXI-1470 Support software.
Copyright
© 2014 Phase Matrix. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of Phase Matrix Corporation.
Phase Matrix respects the intellectual property of others, and we ask our users to do the same. Phase Matrix software is protected by copyright and other intellectual property laws. Where Phase Matrix software may be used to reproduce software or other materials belonging to others, you may use Phase Matrix software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Trademarks
The Phase Matrix logo is a registered trademark of Phase Matrix, Inc., a National Instruments Company. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.