From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
September 2019
This file contains important information about LabVIEW 2019 Service Pack 1 (SP1) for macOS, including system requirements, installation instructions, known issues, and a partial list of bugs fixed. LabVIEW 2019 SP1 for macOS is available only in 64-bit.
Refer to the NI website for the latest information about LabVIEW.
Refer to the labview/readme directory for readme files about LabVIEW add-ons, such as modules and toolkits.
Product Security and Critical Updates
Supported Modules and Toolkits
LabVIEW 2019 SP1 for macOS has the following requirements:
| macOS | Run-Time Engine | Development Environment |
|---|---|---|
| Processor | Intel-based processor | Intel-based processor |
| RAM | 256 MB | 2 GB |
| Screen Resolution | 1024 x 768 pixels | 1024 x 768 pixels |
| Operating System | macOS 10.13 or 10.14 | macOS 10.13 or 10.14 |
| Disk Space | 257 MB | 1.4 GB for the complete installation |
| Temporary Files Directory | N/A | LabVIEW uses a directory for storing temporary files. NI recommends that you have several megabytes of disk space available for this temporary directory. |
| File System | Case-insensitive | Case-insensitive |
Note
| ||
Complete the following steps to install and activate LabVIEW for macOS.
Insert the LabVIEW installation media and follow the onscreen instructions to install LabVIEW. To omit some of these files, click Customize on the Installation Type page.
To install LabVIEW modules and toolkits, refer to the readme of each product for installation instructions. The LabVIEW VI Analyzer Toolkit installs with the LabVIEW Professional Development System for macOS.
You can install NI device drivers from ni.com/macdrivers.
Refer to the LabVIEW Upgrade Notes for information about protecting existing VIs and projects before installing a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2019.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Complete the following steps to install a patch on computers with LabVIEW 2019 SP1. Replace f# with the specific patch you are installing.
You can access a list of issues fixed for LabVIEW 2019 SP1 on the LabVIEW 2019 SP1 Patch Details page.
Visit ni.com/security for security information about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
LabVIEW 2019 SP1 for macOS supports the following modules and toolkits.
1 The Control Design and Simulation Module does not support the System Identification VIs, System Identification Assistant, and Control Design Assistant.
2 The MathScript Module does not support the libraries class of MathScript Module functions.
3 The VI Analyzer Toolkit and Application Builder install with the LabVIEW Professional Development System. For the LabVIEW Full Development System, you can purchase and install the VI Analyzer Toolkit and Application Builder with their own separate media.
Refer to the readme of each product for more information about system requirements, installation instructions, and activation.
LabVIEW 2019 SP1 for macOS supports the following drivers. To use hardware with LabVIEW 2019 SP1, install the latest version of the driver for the device.
Refer to the readme of each driver for more information about system requirements and installation instructions.
You can access the software and documentation known issues list online. Visit ni.com/info and enter the Info Code lv2019ki for an up-to-date list of known issues in LabVIEW 2019 and LabVIEW 2019 SP1.
The following items are the IDs and titles of a subset of issues fixed in LabVIEW 2019 SP1. This is not an exhaustive list of issues fixed in the current version of LabVIEW. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
| ID | Fixed Issue |
|---|---|
| 742093 | Maps containing classes cause LabVIEW to crash while probing. |
| 741834 | The Compare VI Hierarchies will delete folder named C:\\temp when saving a Microsoft Word report. |
| 741225 | LabVIEW crashes when trying to autoindex a Map. |
| 740616 | LabVIEW hangs when double-clicking a recursive dynamic dispatch VI in the Choose Implementation diagram preview. |
| 739464 | Prompt User for Input Express VI only shows the message to display option. |
| 739174 | Error Case structures only designed to handle Error 1 incorrectly handle all errors in error case. |
| 738672 | Change To Array and Change To Scalar do not work for elements inside a set or map constant. |
| 738587 | Source distribution that would previously fail because of missing commented-out dependencies will now succeed with warnings. |
| 736445 | The select function always gives outputs false if nothing is in a While Loop. |
| 735521 | Implicit Value (Signaling) Property node does not change type definitions correctly. |
| 733737 | CPU Load raises 20% when a front panel with custom style element is shown. |
| 727397 | Replacing nodes with Malleable VIs connects wires to unused terminals. |
| 726223 | Build Errors when building Malleable VIs into an EXE. |
| 723686 | Disabled structures within VIMs are not included in PPL builds, as expected, but the files within these structures are referenced in debugging mode. |
| 686080 | Replacing ActorFramework.lvlib with a packed project library causes LabVIEW crash. |
| 678300 | Shared/preallocated subVI clones can become locked when called from another VI at the same time. |
| 603576 | Channels carrying typedefs/classes create crosslinks when users duplicate projects. |
| 245148 | Class Properties dialog sometimes throws timeout error 123 when opening and must be restarted. |
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about LabVIEW 2019 SP1.
Copyright
© 2004–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
For end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374717M-01