Demodulate an AM Signal with the RF Signal Analyzer

Publish Date: Jun 04, 2013 | 0 Ratings | 0.00 out of 5 | Submit your review

Overview

Signal Processing Resource Center » Modulation Toolkit Shipping Examples » Demodulate an AM Signal with the RF Signal Analyzer

This example demonstrates demodulation of a amplitude-modulated IQ complex signal acquired using the RF signal analyzer. The complex-envelope baseband data is then demodulated to retrieve the original information signal. You can perform measurements on the demodulated signal to calculate the carrier frequency and amplitude, and the modulation depth of the original AM signal.

Table of Contents

  1. Front Panel
  2. Front Panel
  3. Related Links

1. Front Panel

Back to Top

2. Front Panel

This example requires LabVIEW and is included with the Modulation Toolkit. Go to the LabVIEW Online Evaluation to try this example. After starting the evaluation, open LabVIEW and navigate to Help » Find Examples... » Toolkits and Modules.

 



Back to Top

3. Related Links

Back to Top

Bookmark & Share


Ratings

Rate this document

Answered Your Question?
Yes No

Submit