SSR-ODC5

Output Module for SSR

Contact us Please select your country to get pricing information

60 VDC Output Module for SSR—The SSR‑ODC5 uses a logic TTL signal from a data acquisition device to switch AC and DC loads in a manner similar to conventional relays. If the data acquisition device is sending a logic low, the SSR‑ODC5 is turned on and current can flow. If the device sends a logic high, the SSR‑ODC5 is turned off and current is stopped. Unlike conventional relays, the SSR‑ODC5 has zero voltage turn on of the load. Also, a load voltage and minimum current must be present to maintain the SSR‑ODC5 in the on state.

Product Support Resources

Getting Started Tutorials

Learn how to connect and configure your hardware to take your first measurement.