Oscilloscope Probe

200 MHz, ±60 V, 1X or 10X Attenuation, Single-Ended Passive Oscilloscope Probe—The SP200B is a standard switchable passive probe for oscilloscopes that provide 1 MΩ input impedance. Depending on the attenuation ratio, the probe has an analog bandwidth of 6 MHz in the 1x attenuation setting or 200 MHz in the 10x attenuation setting.

Product Support Resources

Explore a wide range of support content, including examples and troubleshooting information.

Network, share, and ask questions with other members of the NI community.