From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Brushless Servo C Series Motor Drive Module—The NI‑9502 is a single‑axis module that can drive three-phase brushless servo motors. Motor control, which is traditionally fixed in drive firmware, is implemented using an FPGA and is fully customizable in the LabVIEW FPGA Module with LabVIEW SoftMotion Module motor control VIs. The NI‑9502 provides an alternative to expensive and time-consuming custom drive development or paying a drive vendor for custom firmware. Furthermore, the NI‑9502 eliminates large stand-alone motor drives and unwieldy cabling to enable highly embedded motion systems.
Explore articles written by our support engineers to help you troubleshoot problems and complete common tasks.
See which software, hardware and operating systems are compatible with your product.
Learn how to connect and configure your hardware to take your first measurement.