From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
1-Channel Direct Injector Control and Measurement Device—The DCM-2301 can control injector and fuel systems, accommodating one piezoelectric or two solenoid direct injectors. This device has a boost supply up to 220 V and a peak current of 40 A, providing fault protection and detection. You can control an entire fuel system with this device, using the built-in oscilloscope for recording injector voltage and current waveforms. The DCM-2301 allows you to define current and voltage profiles at rates up to 2 injections per cycle per injector with advanced waveform generation and triggering capabilities.
Learn how to connect and configure your hardware to take your first measurement.