NI-VXI 3.9.0f1 for Windows 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: VXI/VME/MXI

Version: 3.9

Release date: 10-27-2014

Software type: Driver

Operating system: Windows 8.1; Windows 7; Windows Vista 32-bit; Windows XP 32-bit


NI-VXI is the interface software for your National Instruments VXI controller. It provides the necessary driver to access devices on any VXI bus attached to your workstation. Using NI-VXI, you can control a VXI bus using National Instruments VXIpc embedded controllers, MXI-2 extender technology, VXI-USB controllers, VXI-8360 series controllers, or a combination of any of these controllers. Version 3.9 of this software supports Windows XP x86, Windows Vista x86, Windows 7 x86 & x64, and Windows 8.1 x86 & x64. Refer to your hardware documentation for specific Operating System requirements.

Installation Instructions

The NI-VXI 3.9.0f1 patch addresses the issue described in CAR 495266 wherein large register-level transfers over long periods of time could lead to memory fragmentation and an error. This patch helps to prevent memory fragmentation and ensures constant data transfer.

  1. Download NIVXI390f1.exe
  2. Run the self-extracting NIVXI390f1.exe and follow the posted instructions. This will create the installation files necessary for installing NI VXI for Windows
  3. After extraction is complete, run setup.exe to launch the installer


Your Feedback

Rate this document

Answered Your Question?
Yes No