NI-USRP 14.0 - Windows - A Newer Version Is Available 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on Before downloading, click here to review this information.

Download Language: English

Product Line: RF

Version: 14.0

Release date: 09-22-2014

Software type: Driver

Operating system: Windows 8.1 32-bit; Windows 8.1 64-bit; Windows 7 32-bit; Windows 7 64-bit; Windows Vista 32-bit; Windows Vista 64-bit; Windows XP (SP3) 32-bit


This is not the latest version of this driver. Please visit here to find the most recent version.

The software installation provides support for customers using NI USRP transceivers. To program the NI USRP transceivers, use the NI-USRP API.

NI-USRP 14.0 includes the following new features:

Support for LabVIEW 2014.

Supported Hardware

The following table shows which hardware products are supported under particular operating systems.

Hardware Product Supported Under Windows 7 (32-bit)/Vista (32-bit)/XP Supported Under Windows 7 (64-bit)1/Vista (64-bit)1
NI USRP-2920
NI USRP-2921
NI USRP-2922
NI USRP-2930
NI USRP-2932
Ettus Research USRP22
Ettus Research N2002
Ettus Research N2102
Ettus Research X3002
Ettus Research X3102
1 These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).
2 The NI-USRP instrument driver supports WBX, SBX, XCVR2450, LFTX, LFRX, BasicTX, and BasicRX daughterboards on this device. Other daughterboards may also be compatible, but they have not been tested.

Device-specific information about these modules is included in the NI-USRP Help.

Note For NI 292x/293x devices, use LabVIEW 2011 or later. For NI 294x/295x devices, use LabVIEW 2013 or later.

Note You must update the firmware and FPGA images on your USRP module prior to using NI-USRP 14.0. Refer to the NI USRP-29xx Getting Started Guide for more information about updating the firmware and FPGA images.

Application Development Environment (ADE)

Install Application Development Environments such as NI LabVIEW before installing NI-USRP. NI-USRP 14.0 supports the following NI Application Development Environment versions:

  • NI LabVIEW 2011 (32-bit), 2012 (32-bit), 2013 (32-bit), 2014 (32-bit), 2014 (64-bit)
  • (optional) LabVIEW FPGA Module 2013, 2014

Installation Instructions

Installation Instructions

Perform the following steps to install NI-USRP:

  1. Create a temporary folder on your local hard drive and name it NIUSRP1400
  2. Download and save the file into the folder you created in step 1.
  3. To launch the NI-USRP installer, extract the fie and double-click the setup.exe application.

To conserve disk space you can delete the downloaded .zip file, however it is recommended that you keep the extracted installation files in case you need to add features from the NI-USRP distribution in the future, or plan to create your own installers using National Instruments development environments.

More Information

Your Feedback

Rate this document

Answered Your Question?
Yes No